BELCOM MBLC-8 8WATT C-BAND BLOCK UPCONVERTERS

Be the first to review this product

Availability: In stock

$1,495.00

Quick Overview


  • 8W Power Ouput

  • F or N type input connector

  • CPR-137 Waveguide Output

  • Weight 2.2 kg

BELCOM MBLC-8 8WATT C-BAND BLOCK UPCONVERTERS

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • BELCOM MBLC-8 8WATT C-BAND BLOCK UPCONVERTERS

The C Band VSAT upconverter transmitter is a linear outdoor unit used for the uplink of a VSAT network.

Its new design and light weight makes it ideal for direct mounting on the VSAT antenna feed or OMT.

Its competitive pricing and large install base in countries with extreme weather conditions makes the mBLC-5 an ideal choice for all VSAT and SCPC applications.

FEATURES

  • Output Power (at 1dB compression) 34.5 - 39 dBm
  • Synthesized L.O.
  • External Reference
  • Weight: 1.9 - 2.2 Kg
  • Dimensions: 216 X 136 X 53 mm (216 X 136 X 63 mm mBLC-8)
  • Operating Temperature -40 to +55 Deg. C
  • Weather Sealed (including connector)
  • Available in all C-Band frequencies (C-Band, Palapa, InSat)
Manufacturer Belcom

Use spaces to separate tags. Use single quotes (') for phrases.

 

3 Watt BUC Performance Characteristics
Electrical
Input impedance 50O / 75O
Input VSWR 2:1
Output power (at 1Gain compr.) +39.0dBm (min.)
Gain(Nominal) 58±3 dB
Gain Flatness 
    Over any 36 MHz band
    Over Frequency Range
  
±0.75 dB max
±2.0 dB max
Gain Stability (over temp.for constant freq.) ±2.0 dB
Ref. signal External 10MHz(std.) 0 ±5dBm
Spectrum sense Non Inverting
Total frequency accuracy Control by Reference
Phase noise
    at 100 Hz offset
    at 1 KHz offset
    at 10 KHz offset
    at 100 KHz offset 
    at 1 MHz offset
  
-60 dBc/Hz
-70 dBc/Hz
-80 dBc/Hz
-90 dBc/Hz
-100 dBc/Hc
Leakage and Spurious Signals
Up to 1dB comp. In-Band -20 dbm max  
3rd Order intercept point, IP3 46 dbm (min)
Stability The unit will not oscillate under any condition of load, temperature or DC supply.
Protection
Thermal runaway protection  
No failure for any combination of load reflections  
DC supply spikes protection  
Missing 10MHz Ref. shuts transmitter to -30dBm max  
Input DC voltage +15 to +24V
DC power consumption (max) 60W
Mechanical
IF + DC + reference input 75O, F-type (f)
50O, N-type (optional)
RF output CPR-137
Weight 2.2 Kg.
Finish White polyurethane paint
Environmental
Operating Temperature -400C to +550C
Sealing Moisture sealing by O-ring